How to upgrade Neverfail Heartbeat version V4.6.0 (359) to V4.6.1 (360)

Follow

Summary
=======

This Knowledgebase article provides information for users upgrading from Neverfail Heartbeat V4.6.0 to V4.6.1.


More Information
================

BEFORE YOU BEGIN:

- Please ensure you have read and fully understood the instructions below BEFORE attempting to install the update.


To upgrade Neverfail Heartbeat version V4.6.0 to V4.6.1, complete the steps below:

On a remote client PC, or the ACTIVE server, as appropriate:

1. Download Z-Sw-H-V4.6.1.zip from the appropriate product area of the Neverfail Partner Extranet and extract the contents to a folder. Copy this folder (referred to below as the 'update kit' folder) to both of the servers in your Neverfail pair, and to any remote client PCs running the Neverfail Heartbeat Management Client.

2. Shutdown Neverfail Heartbeat, and close all Neverfail utilities such as the Neverfail Server Pairs Overview window, the Neverfail Heartbeat Management Client, the Neverfail Server Configuration wizard, the Neverfail 'Configure Monitoring' GUI, the nfclient utility, or any other Neverfail applications you may have open on the Active and Passive servers. You can leave the protected applications running.


3. On the passive server (normally the Secondary):

- Run the Setup.exe program in the update kit folder.
- On the "Setup Type" screen, select "Install Service Pack" and "Next>"
- On the "Service Pack Configuration" screen, select "Add..." and then browse to the Patch4-6-359to360.amx file in the update kit folder.
- For the remaining steps follow the instructions on the screen.


4. On the active server (normally the Primary):

- Run the Setup.exe program in the patch kit folder.
- On the "Setup Type" screen, select "Install Service Pack" and "Next>"
- On the "Service Pack Configuration" screen, select "Add..." and then browse to the Patch4-6-359to360.amx file in the update kit folder.
- For the remaining steps follow the instructions on the screen.


5. On any remote client PC:

- Run the Setup.exe program in the update kit folder.
- On the "Setup Type" screen, select "Install Service Pack" and "Next>"
- On the "Service Pack Configuration" screen, select "Add..." and then browse to the Patch4-6-359to360.amx file in the update kit folder.
- For the remaining steps follow the instructions on the screen.


6. Start Neverfail Heartbeat on the passive server, and then on the active server.

7. On a remote client PC, or the active server, as appropriate, use the Neverfail Heartbeat Management Client to check that the Neverfail Channel is connected and that a full system check is in progress.

KBID-477

0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.