This Knowledgebase article provides information about this specific release of Neverfail Heartbeat v6.7.7
This release serves as a patch release that includes all previous fixes and features contained in all previous Neverfail Heartbeat v6.7.[n] releases to include the issue caused by attempting to upgrade the 32-bit version of JAVA 8 to Update 60.
Technical Documents supporting this version of Neverfail Heartbeat are contained in Knowledgebase article #2552 - v 6.7.[n] Neverfail Heartbeat - Technical Documentation .
Supported Operating Systems
- Windows Server 2003 x64 Standard / Enterprise / R2 with SP2
- Windows Server 2008 x64 Standard / Enterprise with SP1 or SP2
- Windows Server 2008 R2 x64 Standard / Enterprise / Datacenter with SP1
- Windows Server 2012 x64 Standard / Datacenter
- Windows Server 2012 R2 x64 Standard / Datacenter
Note: Neverfail Heartbeat supports installation on German and Japanese language operating systems.
Supported Virtualization Platforms
- Virtual Machines running on Microsoft's Hyper-V
- Virtual Machines running on VMware's ESX
- Virtual Machines running on Citrix XenServer
Note: Neverfail Heartbeat supports any combination of physical / virtual servers.
Neverfail Engine System Integrity
- Enhanced resistance to Neverfail Heartbeat registry preference configuration loss.
Support for Windows Server 2012 and Windows Server 2012 R2
Note: Neverfail Heartbeat v6.7.7 is compatible with Windows Server 2012 but does not incorporate any Windows Server 2012 new features.
- This release includes a new version of Neverfail SCOPE Data Collector Service (v5.3.0).
- Neverfail Heartbeat Management Client support for Windows 8 and Windows 10.
- Support for installation and operation using a single NIC for both the Principal (Public) and Neverfail Channel connections.
Enhanced Fast Check support for:
- File servers with 1 Million + files
- Closed files for running applications
- Fast Check use at first time start-up
- Improved administrator control over options for synchronization time versus application start-up time.
- Configurable FileInfoCache.
- Controlled Shutdown enhancement
Enhanced Controlled Shutdown:
- Prevents application shutdown when the passive server is stopped.
- Increases WAN timeout to 15 minutes.
- Includes a default schedule outside of working hours.
- Does not allow Administrator to prevent Controlled Shutdown on the active server.
Since the release of Neverfail Heartbeat v6.7.1
The following is a list of issues fixed since the release of Neverfail Heartbeat v6.7.1
- An unhandled exception during a swithover plan execution may lead to data coruption (EN-1177).
- FileInfoCache operating in full mode possibly preventing FastCheck from running (EN-1329).
- The Neverfail Heartbeat Management Client may not accurately display check-marks in the Server Summary pane (EN-647).
- The Send and Receive Queue state may not be displayed accurately (EN-915).
- The channel routing may not be displayed (EN-915).
- Auto-switchover causes AMFx property synchronization loop on Windows 2012 R2 and NFHB 6.7.1 (EN-504)
- Management Console: Two arrows pointing to the Tertiary server (EN-648).
- The Neverfail Heartbeat Management Client no longer shows a green check mark on every server in the Server Summary screen (EN-624).
- The Hotfix Neverfail Heartbeat v6.7.1 running on Windows Server 2012; 64 bit is included in this release.
- Incorrect network connectivity state global model merge while the Secondary server is active following an auto-switchover (Ref-EN-588).
- In the event the registry preferences be lost, they will be restored during the Neverfail Heartbeat Server service restart (EN-1447).
After upgrading from a previous version of Neverfail Heartbeat, configured Failure Actions may not be preserved.
Workaround: Review and if necessary reconfigure Failure Actions (EN-833).
- When using SNMP, the SNMP Agent fails to find the local port for Web Services. To workaround this issue, refer to Knowledgebase article #2605 (Ref-14798).
- Performing a Service Pack upgrade does not upgrade the System Plug-in. The System Plug-in must be upgraded separately using the procedure provided in Knowledgebase article #1863 (Ref-7123).
- Installation of Client Tools using a file path longer than 100 characters may cause the installation of Client Tools to fail (Ref-13343).
- Restoring to a non-cloned Secondary or Tertiary server results in the following pop-up being displayed: This copy of Windows is not Genuine (Ref-9444).
When installing using a single NIC on the Primary server and a single NIC on the Secondary server, validate displays a warning message that two NICs are required.
Workaround: The warning message can be ignored. Continue installation (Ref-14309).
- When performing an installation with differing updates/hotfixes on the servers, after restoring the backup file to the Secondary server, the server keeps rebooting (Ref-8519).
- The Packet filter does not work after a Physical to Virtual Install Clone if VMware Tools were installed; please uninstall VMware Tools before performing the restore to a virtual machine (Ref-10993).
After performing a switchover or failover, if network ping targets have not been configured, the message "-1 missed pings appear" is present (EN-704).
Workaround: Navigate to Network > Configure Pings > Ping Routing and configure the ping targets.
- When resizing the Neverfail Heartbeat Management Client window, some buttons may disappear as a result of the resizing (EN-731).
- Neverfail Heartbeat Management Client v6.7 is not backwards compatible for versions 6.6.0 and earlier. When using Neverfail Heartbeat Management Client v6.7 to view Neverfail Heartbeat v6.6.0 and earlier, the event logs may have missing or garbled event entries (ref-13233, 13238).
- Viewing Neverfail Heartbeat Online Help with Internet Explorer requires Active Scripting to be Enabled in Internet Explorer.
- Neverfail SRMXtender - When a Make Active command is inserted into a Site Recovery Manager plan and the plan is executed in test mode, the message displayed in the History tab after a Make Active command may not be correct (Ref-12841).
- Neverfail Tasks and Events are not logged in vCenter 4.1 and earlier so will not appear in the vSphere Client (Ref-12831).
- SCOM - Discovery Data received about the Channel ID between the Secondary and Tertiary servers may not be valid (Ref-12885).
- SCOM - The counter %ProcessorTime is not viewable in the SCOM Server Performance View (Ref-12786).
- SNMP - The Neverfail Heartbeat server ASN1 Table may contain wrong values when replication is stopped (Ref-12340).
- SNMP - ApplicationStarted and ApplicationStopped SNMP Traps messages are logged twice (Ref-12335).
- If Neverfail Heartbeat is installed on Windows Server 2003, and .Net 2.0 is not present, an error occurs when the Log Collector utility is run. (Ref-14507, 12880).
- Editing and dissolving a Business Application Group when one of its servers is disconnected requires the Business Application Plug-in to be removed from the disconnected server (Ref-12536).
- Valid Business Application Groups require a minimum of two member servers (Ref-12812).
- If the First to Switch server in a Business Application Group cannot be contacted, use the Neverfail Management Client to log into the Disaster Recovery server of the First to Switch Cluster, select the Disaster Recovery server and click Make Active to initiate the site switchover (Ref-12535).
- When attempting to uninstall Neverfail for Exchange Plug-in an error stating that a specified file could not be found is displayed although the uninstall procedure completes successfully (Ref-12570).
- The System Plug-in fails to load on the passive-Tertiary server; the service starts but appears to be deadlocked (Ref-11454).
- The DNS Update task may fail when run under the System account on the Secondary / active server after switchover (Ref-10837).
DNS Update is not querying for the correct zone name (Ref-8358).
Workaround: Manually configure the DNS Update task.
- After a switchover in a WAN deployment, the DNS Update task status is not updated on the Applications: Tasks page until after the applications are started (EN-739).
- Data Rollback - The Create button remains enabled while the create shadow operation is in progress (EN-730).
- When navigating to the Data: Replication page and clicking the Show Summary Of All Out Of Sync Files And Directories button to expand the Out of Sync Summary panel, the panel appears and then minimizes (EN-740).
Performance counters missing on Secondary and Tertiary servers produce warnings and a degraded Neverfail Heartbeat performance.
Workaround: Shutdown Neverfail Heartbeat on the Secondary / Tertiary server and run the following from a command prompt:
lodctr /R in a cmd window
When attempting to collect logs via the Neverfail SCOPE Configuration Tool, the dialog prompting you to put Neverfail into the Maintenance Mode is hidden behind the Neverfail SCOPE Configuration Tool dialog and prevents you from collecting the logs (Ref-14294).
Workaround: Either maximize the dialog icon from the Windows Toolbar or use Alt + Tab to bring the dialog forward so that a response can be given to the prompt.
- The 'Warning' pop-up is too wide when failing to open file for exporting (EN-755).
- The Event Properties Detail can go blank when a new balloon error is generated (EN-762).
- A Full System Check doesn’t mark the system as Out-Of-Sync when extended attributes are present (EN-688).
- The user can attempt to add user accounts by connecting to passive servers which will fail because the server can’t see the domain (EN-660).
- When a tertiary system is shutting down, the Management Client may falsely show two arrows pointing to the tertiary server (EN-648).
- The Management Client may always show auto-switchover tasks completing in the event log (EN-656).
- Alerts and Warning icons don’t replace the green tick on the server, just the whole group (EN-665).
- 'Failover Prevented' appears twice in the Configure Alerts pane of the Management Client (EN-670).
- The Management Client accepts a blank hostname to mean localhost (EN-667).
- A Typo exists in Fast Check with limited application delay setting – missing closing parenthesis (EN-671).
- File Server Plug-in prevents system tray icon’s Start Group feature from working (EN-678).
- Switchover will continue even if pre-start or pre-stop scripts return an error (EN-682).
- The NFServerR2 service doesn’t have a description (EN-684).
- From the Applications: Summary pane you can uninstall a plug-in while not all servers are connected (EN-685).
- Cancelling an uninstall of a 6.7.0 kit that was upgraded from 6.6.2 may crash Setup (EN-686).
- Typo when Setup’s install is restoring a Windows Backup - the user can see progress stating “tart the computer now” (EN-687).
- The Third Recovery Action for services occasionally doesn’t trigger (EN-692).
- In some physical environments the packet filter install hangs (EN-706).
- Validate cannot proceed if the user enters the wrong credentials the first time (EN-711).
- Error messages may appear as question marks on Japanese systems (EN-714).
- There are no upper-bounds on accepted percentage conditions in the Application Rules (EN-694).
- During installation it is possible to select a network adapter so that it looks selected but isn’t, so the Next button remains greyed out (EN-699).
- If the Network Monitoring targets are not configured then the Network Status shows “-1 missed pings” (EN-704).
- The Server Monitoring ping configuration asks for an IP but accepts any input (EN-709).
- The drop-down list for "Server Monitoring: Ping Configuration" and "Network Monitoring: Ping Configuration" are always empty (EN-716).
- The Plan Actions only appear on the local Management Client (EN-732).
- There is no error presented when an unlicensed plug-in fails to install (EN-741).
- Managing hundreds of servers can cause the Default Group to disappear in the Management client (EN-764).
- The Management Client can use a lot of memory if there are 1000s of file filters (EN-769).
- The switchover plan may fail after unprotecting and then again protecting an application (EN-1446).
Installation instructions are found in the following Neverfail Heartbeat v6.7 Installation Guides .
- Installation of Neverfail Heartbeat v6.7 on Windows Server 2012 When the Secondary Server is Virtual
- Installation of Neverfail Heartbeat v6.7 on Windows Server 2012 When the Secondary Server is Physical
- Installation of Neverfail Heartbeat v6.7 on Windows Server 2008 When the Secondary Server is Virtual
- Installation of Neverfail Heartbeat v6.7 on Windows Server 2008 When the Secondary Server is Physical
- Installation of Neverfail Heartbeat v6.7 on Windows Server 2003 When the Secondary Server is Virtual
- Installation of Neverfail Heartbeat v6.7 on Windows Server 2003 When the Secondary Server is Physical
Command Line Installation of Neverfail Heartbeat v6.7
Note: Neverfail recommends when upgrading Neverfail Heartbeat Client Tools that the installation path be no more than 100 Characters long (Ref-13343).
Neverfail Heartbeat v6.7.7